Quicksilver 675WE, Owner'S Manual

Page: 52 / 91

Quicksilver 675WE — System & Component Overview and Operation
40
Interior Dinette
Dinette storage / backrest receivers
Aft seat storage
Dinette floor storage
Aft backrest receiver
Forward seat storage
Forward backrest receiver
either facing forward or facing aft by simply repositioning the backrest. Located on the horizontal
surface of the forward seat base are receivers for the backrest cushion. To sit facing forward, simply
place the backrest in the aft receivers. The seat base cushion has snaps that are connected to a strap,
allowing the cushion to slide forward. To sit facing aft, place the backrest in the forward receivers.
Dinette Table
To install the table, push and lock the table leg into the base plate. Next, place the table onto the table
leg. When not in use, the table is stored in the forward berth storage area under the mattress and
table leg is stored in the aft dinette seat.
Sleeping Berth
To convert to a sleeping berth, first remove the table and table leg. Next, using the table as a filler
board, set the table into the detailed grooves along the edge of the seat base. The table leg can be
stored in the aft dinette seat as it is not needed. Finally, install the backrest into the backrest receivers
located on the vertical face of the forward seat base.
Forward Facing Position
Table
Sleeping Berth
Berth backrest receiver
Aft seat backrest
Aft seat cushion
Forward seat backrest
Forward seat cushion
Table
Table leg
Table base
Filler cushion