QuickLabel QL-60 User Manual Download Page 25

Page: 25 / 158

QL-30/60 User Guide

Touchscreen Display

The user can control the operation of the printer with the control panel (

“Configuration” on page

), for example:

•

Issuing, interrupting, continuing and canceling print jobs

•

Setting printing parameters, e.g. heat level of the printhead, print speed, interface
configuration, language and time of day

•

Control stand-alone operation with a memory module

•

Update the firmware

Many functions and settings can also be controlled by software applications or by direct
programming with a computer using the printer’s own commands.

Settings made on the touchscreen display make the basic settings of the label printer.

Note:

It is advantageous, whenever possible, to make adaptations to various print jobs in the

software.

Start Screen

Table 1:

Start screen

After switching on

Summary of Contents for QL-60































































































































































Search results

Summary of Contents for QL-60

Reviews:

Related manuals for QL-60

Brands by name

Popular brands

QuickLabel QL-60, User Manual

Search results

Summary of Contents for QL-60

Reviews:

Related manuals for QL-60

Brands by name

Popular brands