QuickLabel Kiaro! 200 User Manual Download

Page: 98 / 150

Kiaro! 200 Maintenance Utility

Kiaro! 200 User Guide

Saving Log Files

Launch the Kiaro! 200 Maintenance Utility.

From the Windows Start Menu, choose

Start > All Programs > QuickLabel

Kiaro! 200 > Kiaro! 200 Maintenance Utility

. A language and printer prompt will

open.

Select a display language and the Kiaro! 200 printer you want to connect to.
Choose

Choose the

System Logs

tab.

Choose the type of log you want to save.

•

Save History to File

- Choose this option to save the error history to a text file

on your PC.

•

Save Printer Settings to File

- Choose this option to save the printer’s

registration, consumable levels, and other settings to a text file on your PC.

•

Save System Logs to File

- Choose this option to save the system logs to a

file on your PC. System logs contain detailed technical information that will be
useful only to QuickLabel Support. These files are not intended for user
analysis.

After the log file is created, a message will appear indicating the log was created
successfully.

Summary of Contents for Kiaro! 200























































































































































Search results

Summary of Contents for Kiaro! 200

Reviews:

Related manuals for Kiaro! 200

Brands by name

Popular brands

QuickLabel Kiaro! 200, User Manual

Search results

Summary of Contents for Kiaro! 200

Reviews:

Related manuals for Kiaro! 200

Brands by name

Popular brands