QuickLabel Kiaro! 200, User Manual

Page: 26 / 150

Quick Start Guide
12 Kiaro! 200 User Guide
15 Position the media exit guide just before it contacts the media.
Label media should be able to move smoothly without being hindered by the exit
guide.
Note: The guide should be positioned to just touch the edge of the liner and not
cause exposed liner to curl.
16 If your printer model has a roll cover, close it.
17 Ensure the power switch on the supply mandrel is in the on position.
Verifying Label Width
When designing labels, ensure the width of your label design matches the width of the
media you will be using. If your label file is wider than the media, the printer will attempt
to print the full width of your label. In this situation, ink will be injected into the transport
assembly and will require cleaning.
Use the ruler on the manual cutter to verify the width of your label media before printing.