QuickLabel Kiaro! 200 User Manual Download

Page: 71 / 150

Kiaro! 200 Maintenance Utility

Kiaro! 200 User Guide

Choose

Update Firmware

. The Upgrade Firmware window will open.

Choose the

...

button. Browse to the Kiaro! 200 Firmware file (*.udf) and choose

Open

Choose

Send to Printer

A progress indicator will be displayed and the printer firmware will be upgraded.
When this process is complete, the printer will restart automatically.

Setting the Clock

Launch the Kiaro! 200 Maintenance Utility.

From the Windows Start Menu, choose

Start > All Programs > QuickLabel

Kiaro! 200 > Kiaro! 200 Maintenance Utility

. A language and printer prompt will

open.

Select a display language and the Kiaro! 200 printer you want to connect to.
Choose

Choose the

Printer Information

tab.

To set the date/time controls to the current date/time as defined by your Windows
clock, choose

Get Current Time

To read the time from the printer's internal clock and set the date/time controls
accordingly, choose

Read From Printer

To set the printer’s internal clock, select a date/time with the controls and choose

Save to Printer

Summary of Contents for Kiaro! 200























































































































































Search results

Summary of Contents for Kiaro! 200

Reviews:

Related manuals for Kiaro! 200

Brands by name

Popular brands

QuickLabel Kiaro! 200, User Manual

Search results

Summary of Contents for Kiaro! 200

Reviews:

Related manuals for Kiaro! 200

Brands by name

Popular brands