manualshive.com logo in svg

QuickLabel Kiaro! 200, User Manual

Share
Download
QuickLabel Kiaro! 200 User Manual Download Page 88

Kiaro! 200 Maintenance Utility

74

Kiaro! 200 User Guide

7

Adjust the horizontal and vertical registration of each color for the left and right 
printheads.

In the following illustration, a label is exiting the printer. Note the positive and 
negative adjustment directions.

8

Choose 

Save to Printer

. The manual color registration settings will be saved.

Using the Slant Adjustment

The slant adjustment procedure adjusts the angularity of each color relative to the 
reference color (black). It ensures that all colors are parallel to black.

Note: 

The slant adjustment is rarely needed. Contact Technical Support for assistance 

with this procedure.

1

Ensure that 8.35 x 6.1 in. (212 x 155 mm) media is loaded.

2

Launch the Kiaro! 200 Maintenance Utility.

From the Windows Start Menu, choose 

Start > All Programs > QuickLabel 

Kiaro! 200 > Kiaro! 200 Maintenance Utility

. A language and printer prompt will 

open.

Select a display language and the Kiaro! 200 printer you want to connect to. 
Choose 

OK

.

3

Choose the 

Adjustments

 tab.

Summary of Contents for Kiaro! 200























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands