Quickie Groove, Technical & Service Manual

Page: 50 / 182

50 ©2006 Sunrise Medical
QUICKIE ELECTRONICS SECTION
Wiring :
Before making any connections to the Controller, disable the Wheelchair by disconnecting the Batteries •
and/or elevating the drive wheels.
All wiring should be as short as possible to minimize voltage loss at High Current.
•
Use only Sunrise Medical approved wiring Harnesses to connect the Motor Controller. •
Wiring should be suitably restrained and fastened to the wheelchair to prevent snagging and to ensure that •
there is no strain on connectors.
QR-MAC - Quickie Rehab Multiple Actuator Control
SUNRISE PART # 020007
Works only with QR system.
Used when more than 2 actuators are required •
in the seating system.
Actuator outputs for left and right leg rests (4A),
•
tilt, lift, recline (10A).
2 bus ports to allow connection to other Delphi
•
QR components.
Battery power input for remote actuator control
•
option.
Hex switch input for remote actuator control
•
option.
Input for anti-tip actuator, attitude sensor and
•
auto-home switch.
Incorporates lockout angle settings, creep,
•
inhibit, encoder and limit switch inputs.
Works with many types of actuators for future
•
design fl exibility.
Recline / leg rest combined operation feature. •
Enhanced recline (combination recline / tilt) •
option.
Fig 2.18