Quickie Attitude, Directions For Use Manual

Page: 70 / 86

ENGLISH
23 Attitude Power Rev.1.0
Switching on and off:
Switching on
To switch on the system operate the main switch at the
battery. Immediately the screen appears.
Switching off
To switch off your add-on bike you need to press the
main button on the battery.
WARNING!
Always switch your add-on bike off when it is not used.
Overview of functions
The LCD display offers the following main functions:
• Battery voltage display
• Motor level selected
• Cycle computer : Current speed, max. speed, trip
distance, daily riding time, total kilometres
• Background light (on/off)
Ansmann LCD display view
The 3 buttons shown below corespond to the following
functions, (Fig.3.1):
MODE
PLUS (UP)
MINUS (DOWN)
Installing the display
Attach the display on the left hand side of your add-on
bike’s handlebar and adjust the viewing angle to suit your
height. Tighten the Allen screw of the clamp so that the
display does not move on the handlebar, (Fig.3.2).
CAUTION!
Make sure that the distance to the speed sensor is not
more than 5mm from the magnet, (Fig.3.3).
Fig.3.1
Fig.3.2
Fig.3.3
3.0 Functions of the Ansmann system