Quickie Attitude Directions For Use Manual Download

Page: 23 / 86

ENGLISH

Attitude/Attitude Hybrid Rev.1.0

Neodrive Components:

•

Drive motor.

•

Smart MMI (display) incl. dock.

•

This operating manual.

Technical Data:

Drive

Range*:

120 km

Speed

25 km/h

Power rating (peak)

250 Watt (650 Watt)

Operating voltage

36 Volt

Rated torque

12 Nm

Peak torque

40 Nm

Level of efficiency

80 % (incl. electronics)

Control system performance electronics

Integrated into the wheel hub

Cassette receiver commercially available

Plug-in cassette, up to 10 times

Brake disc

From 160 mm diameter

Torque receiver

Variable torque supports can be adjusted to the dropout

Weight

4.36 kg (just the drive including plug and cable, without

brake disc, free wheel, cassette)

Smart MMI

Display

control monochrome

Display diagonal, resolution

2.4 inch, 240 x 320 pixels

Dimensions sMMI without dock (W X L X H)

53 mm x 85 mm x 14 mm

Connectivity

Micro-B 1.1 USB, 5 volts power supply, 500 mA

connection to PC with diagnosis and

parametrisation software

Mechanical / electrical contacting

twist-to-lock mechanism, corrosion-protected contacts,

spring loaded

Illumination

LED backlight, 70–350 cd/m²

Display screen

Scratchproof, hardened acrylic glass screen

Weight of the sMMI (detached)

55 g

Smart MMI dock

Controller

23 mm inside diameter, 3 buttons (up, down, menu), hard

wired

Mounting plate

Stem and handlebar mounting, angle can be adjusted in 10°

steps, height can be adjusted using spacers

Weight (incl. cable and remote control)

60 g

Entire system

Operating temperature

- 20 °C to + 50 °C (below 0 °C recuperation or the braking

assistant is automatically deactivated)

Protection rating

IP65

NOTE:

(*) The range depends on the battery used and on the terrain and the prevailing travelling conditions. The

specified range can be achieved at optimum travelling conditions (for instance level terrain, recently charged batteries,

ambient temperature of 20 °C, smooth journey etc.), a driving power of 100 watts and a pedalling efficiency of 100 watts.

We reserve the right to modify the design and technology of our products to incorporate the latest developments. This

operating manual is available for download on our website www.neodrives.de. If you require a version that is written in a

larger font, contact our Alber Service Center.

2.0 Standard Scope of Delivery

Summary of Contents for Attitude























































































Search results

Summary of Contents for Attitude

Reviews:

Related manuals for Attitude

Brands by name

Popular brands

Quickie Attitude, Directions For Use Manual

Search results

Summary of Contents for Attitude

Reviews:

Related manuals for Attitude

Brands by name

Popular brands