Quickie Attitude Directions For Use Manual Download

Page: 73 / 86

ENGLISH

Attitude Power Rev.1.0

TRIP TIME

TRIP

ECO

SPEED

AVG. SPEED

SPEED

MAX

ODO

Fig.3.10

Speedometer, average speed, maximum speed, total

distance, trip distance, trip time:

Before, during and after a journey, various values and

information are displayed and regularly saved.

By repeatedly pressing the button, you can set the

different views.

Fig.3.10

1. Speedometer

2. Average speed

3. Maximum speed

4. Trip time

5. Trip distance

6. Total kilometres

Backlight

To activate or deactivate the backlight of the LCD display,

press and hold the button for 2 seconds. You can

adjust the brightness in 3 steps as described in point 3.6.

Resetting the Trip Distace and Trip Time:

Press the button untill the setting "TRIP" is displayed.

Press and hold the button again for 3 seconds. This

will reset both the Trip Odometer, (TRIP) and the daily

travel time, (TRIP TIME), to zero.

Summary of Contents for Attitude























































































Search results

Summary of Contents for Attitude

Reviews:

Related manuals for Attitude

Brands by name

Popular brands

Quickie Attitude, Directions For Use Manual

Search results

Summary of Contents for Attitude

Reviews:

Related manuals for Attitude

Brands by name

Popular brands