Quick MILL MILANO 0980, Operating Instructions Manual

Page: 8 / 91

8
Ita
lia
no
En
gli
sh
Fr
an
ça
is
D
eu
tsc
h
Safety instructions

Check the data on the rating plate: they have to correspond to that of the
main electrical supply to which the machine will be attached.

Ensure that the capacity and power rating is suitable for the maximum
power consumption indicated on the machine, before connecting the
machine to electric supply.

We do not recommend the use of accessory attachments such as
adaptors, multiboards or extension cords that are not recommended by the
appliance manufacturer as they may cause injury.

Do not use this machine if there is damage to its cord, plug or any other
part or if the machine does not work properly. Return the machine to the
Manufacturer Quick Mill.

This machine has been designed for the sole purpose of producing coffee,
hot water and steam for hot beverages. All other uses are inappropriate
and dangerous. The manufacturer shall not be held responsible for any
damage caused by inappropriate use.

Follow the precautions below to protect the machine from electrical issues:
1. Do not immerse the machine itself, cord and plugs in water or other
liquid; do not let the machine internal parts get in contact with liquid.
2. Prevent the power cable from being stretched or pulled tight.
3. Do not use the machine with wet hands.
4. Do not allow children or untrained persons to use the machine.
5. Do not use the machine with bare feet.
6. Do not spill any liquid over the machine.
7. Do not expose the machine to the sunlight, rain, snow, extreme
temperature etc.

Always use spare parts and accessories Quick Mill certified.

Before
performing any cleaning turn the machine “off” and disconnect it
from the electrical supply.

If the machine operates in a faulty manner, is compromised in its
performance
or stops working, turn the machine into the “off” position at the
machine power switch and disconnect it from the electrical supply: do not
try to repair it. Any repair must be performed by the Quick Mill operator.
Please contact Quick Mill.