Quick MILL MILANO 0980, Operating Instructions Manual, Page: 51 / 91

51
Ita
lia
no
En
gli
sh
Fr
an
ça
is
D
eu
tsc
h
S
IZE
l x h x p
W
EIGHT
:
V
OLTAGE
:
P
OWER
:
T
ANK CAPACITY
:
B
OILER CAPACITY
:
T
EMPERATURE
:
320
X
400
X
460 mm
26 K
G
220/230
V
–
50/60 H
Z
- 115
V
–
60 H
Z
1500 W
3
LITRES
1,80
LITRES
+5°C / +45°C
Commissioning
The 0995 Vetrano model can be supplied either with water coming from the
tank or from the water mains. According to the type of supply, proceed as
follows.
Tank
1. Position the tank/service tap (o), underneath the machine, on tank.
2. Position the tank/service switch (p) on tank.
3. Fill the water tank (k) (use drinking water, softened if possible).
Mains water supply:
1. Connect the mains water supply pipe to the fitting under the machine
position the tank/manins tap (o), underneath the machine, on mains.
2. Position the tank/service switch ( p ) on service.
Important : for this machine model it is necessary that the water collected in the
drip tray is conveyed to the domestic drainage outlet. For this reason, it is
necessary to connect the drip tray under the machine (
q ) directly to the
drainage pipe supplied.
1. Open the water tank lid (r), take out the tank (k) and fill with drinking water,
softened if possible, (only for supply with tank).
2. Connect the machine to an electric socket, switch on the machine with the
general switch (l) in position 1, the green ON light switches on. The
machine fills the boiler, indicated by the red light (n) that switches on.
3. Activate the coffee brew group lifting the lever (b): deliver water from the
group to ensure that the circuit has filled correctly.