LPWA Module Series
BG950A-GL&BG951A-GL_Hardware_Design
85 /89
❒
Catm LTE Band5/26:
≤
12.541dBi
❒
Catm LTE Band12:
≤
11.798dBi
❒
Catm LTE Band13:
≤
12.214dBi
❒
Catm LTE Band85:
≤
11.798dBi
❒
NB LTE Band2/25:
≤
11.000dBi
❒
NB LTE Band4/66:
≤
8.000dBi
❒
NB LTE Band5:
≤
12.541 dBi
❒
NB LTE Band12:
≤
11.798dBi
❒
NB LTE Band13:
≤
12.214dBi
❒
NB LTE Band71:
≤
11.687dBi
❒
NB LTE Band85:
≤
11.798 dBi
5. This module must not transmit simultaneously with any other antenna or transmitter
6. The host end product must include a user manual that clearly defines operating requirements and
conditions that must be observed to ensure compliance with current FCC RF exposure guidelines.
For portable devices, in addition to the conditions 3 through 6 described above, a separate approval is
required to satisfy the SAR requirements of FCC Part 2.1093
If the device is used for other equipment that separate approval is required for all other operating
configurations, including portable configurations with respect to 2.1093 and different antenna
configurations.
For this device, OEM integrators must be provided with labeling instructions of finished products.
Please refer to KDB784748 D01 v07, section 8. Page 6/7 last two paragraphs:
A certified modular has the option to use a permanently affixed label, or an electronic label. For a
permanently affixed label, the module must be labeled with an FCC ID - Section 2.926 (see 2.2
Certification (labeling requirements) above). The OEM manual must provide clear instructions
explaining to the OEM the labeling requirements, options and OEM user manual instructions that are
required (see next paragraph).
For a host using a certified modular with a standard fixed label, if (1) the module’s FCC ID is not visible
when installed in the host, or (2) if the host is marketed so that end users do not have straightforward
commonly used methods for access to remove the module so that the FCC ID of the module is visible;
