QUBINO Flush 2 relay, User Manual

Page: 42 / 59

EN .
42
12. Associations
Use associations for direct communication between the Flush 2 Relay and other devices within
your Z-Wave network without the need of your primary gateway (hub).
Association Groups:
Root device:
•
Group 1: Lifeline group (reserved for communication with the primary gateway (hub)), 1 node
allowed.
•
Group 2: Basic on/off (status change report for Q1 load), up to 16 nodes.
•
Group 3: Switch binary report (status change report for Q1 load), up to 16 nodes.
•
Group 4: Power meter report (power consumption report of Q1 load at status change), up to 16
nodes.
•
Group 5: Basic on/off (status change report for Q2 load), up to 16 nodes.
•
Group 6: Switch binary report (status change report for Q2 load), up to 16 nodes.
•
Group 7: Power meter report (power consumption report of Q2 load at status change), up to 16
nodes.
•
Group 8: Multilevel sensor report (external temperature sensor report – sensor sold separately),
up to 16 nodes.
End point 1 (Wall Switch I1):
•
Group 1: Lifeline group, 0 nodes allowed.
•
Group 2: Basic on/off (status change report for Q1 load), up to 16 nodes.
•
Group 3: Switch binary report (status change report for Q1 load), up to 16 nodes.
•
Group 4: Power meter report (power consumption report of Q1 load at status change), up to 16
nodes.
End point 2 (Wall Switch I2):
•
Group 1: Lifeline group, 0 nodes allowed.
•
Group 2: Basic on/off (status change report for Q2 load), up to 16 nodes.
•
Group 3: Switch binary report (status change report for Q2 load), up to 16 nodes.
•
Group 4: Power meter report (power consumption report of Q2 load at status change), up to 16
nodes.
End point 3 (External Temperature Sensor):
•
Group 1: Lifeline group, 0 nodes allowed.
•
Group 2: Multilevel sensor report (external temperature sensor report – sensor sold separately),
up to 16 nodes.