QubicaAMF 400288005, Installation Manual, Page: 57 / 147

BES X installation manual Console pedestal assembly
P/N: 400288005; Rev: L, 09/21 47
T.10.069 - 286002830 and 286002868 parts and instructions
LCD OR KEYBOARDS
V-SUPPORT SINGLE OR DUAL
V- SUPPORT BACK
V- SUPPORT MOUNTING SCREW S
[ 8,5 ]
.33
1
PEDESTAL
EXTRUSION
2
3
PARTS LIST
# QTY P/N DESCRIPTION
1 1
286002831
286002860 Console table plate (included in 286002830)
Console table plate (included in 286002868)
2
3 1
1 286002832
822332081 Console table top
PHPTS 8 x ,50 B0 TYAP
INSTALLATION INSTRUCTIONS
1. Remove V-Support back.
2. Remove LCD or keyboard if already installed.
3. Remove V-support single or dual.
4. Remove all 5 V-support mounting screws.
5. Locate console table plate (item 1) on the pedestal extrusion as shown.
6. Re-install the front 3 of 5 V-support mounting screws thru the table plate into the pedestal extrusion. Set the screw head height of these 3
screws to .33 (8.5mm) above the table plate, as shown.
7. Re-install the single or dual V-support on top of the table plate and secure loosely with the remaining 2 V-support mounting screws.
8. Align the V-support and table plate with the pedestal extrusion and tighten all 5 V-support mounting screws.
9. Install table top (item 2) and secure, using the provided 4 screws (item 3).
10. Re-install LCD or keyboard if previously removed.
11. Re-install the back cover of the pedestal.
NOTE : The 286002868 table assembly has to be used with 286002861, 286002862, 286002863, or as a replacement on 286002864 or 286002865.