QubicaAMF 400288005, Installation Manual, Page: 127 / 147

BES X installation manual How to
P/N: 400288005; Rev: L, 09/21 117
14.7 How to replace the SuperTouch cable cover (P/N: 288100019)
Starting from the SuperTouch LCD console rev. 3 (P/N: 288150027 ), a new plastic console cover has been
developed and used in place of the old one.
The 289X15140 cable cover used with the new plastic cover, is different from the old 289X15117 cover (out
of production), but it has been designed to be simply adjusted and fully replaces the old cover.
IF YOU DO NOT ADJUST THE 288100019 CABLE COVER WHEN IS NECESSARY, IT WILL NOT FIT INTO ITS
HOUSING ON THE PLASTIC COVER AND IT WILL BREAK IRREPARABLY DURING THE TIGHTENING OF THE
SCREWS.
Follow the procedure described in these instructions to correctly adjust the 288100019 cable cover when it
is required.
IMPORTANT
NEVER use an electric screwer.
Perform all the operations using the proper
screwdriver.
14.7.1 How to understand when to adjust the 288100019 cable cover
When the 288100019 spare part kit will be mounted on a SuperTouch console with P/N 288150027 or higher,
NO ADJUSTMENT IS REQUIRED .
If you are not sure which type of SuperTouch you have installed in your bowling center, follow these steps:
Unmount the “V - Support back” from the console stand.
Position the 288100019 cable cover.
IMPORTANT : do NOT force the cable cover.