Qubic System QS-220-PL, User Manual

Page: 6 / 46

QS-220-PL
■
DO NOT cover the ventilation holes in the QS-SB2 power cabinet.
■
Keep the power cord plug and the socket dry, clean and dust-free.
■
Protect the power cord from damage caused by being stepped on, rubbed against,
or pinched.
■
DO NOT use the QS-220-PL if the ambient temperature is below 4° Celsius (39°
Fahrenheit) or above 45° Celsius (113° Fahrenheit).
■
DO NOT use the QS-220-PL if it has been damaged, or any component is broken or
missing. Please contact technical support.
■
DO NOT use attachments or replacement parts not recommended or approved by
the manufacturer. If you must to replace the power cord use only certified one
with the same rating as replaced one.
■
Connect the QS-220-PL to a properly grounded outlet only. See grounding instruc-
tions in section 2.5 on page 11.
■
If you want to increase safety level of the system, you can add external safety
devices. For detailed information check section 6 on page 31.
WARNING
Stop using the QS-220-PL immediately and contact technical support when the
machine starts to emit unusual noise, smoke or any other suspicious behaviour
indicating the machine is not working properly.
INFO
The maximum supported length of cables is 3 meters:
■
the maximum supported length of the USB cable is 3 meters
■
the maximum supported length of the M-BUS cable between M10 and QS-
SB2 is 3 meters
■
the maximum supported length of the M-BUS cable between the QS-SB2 is
3 meters
■
the maximum supported length of the Motion Lock cable is 3 meters
User Manual R3.0 2