Qubic System QS-220-PL, User Manual

Page: 26 / 46

QS-220-PL
INFO
The manufacturer is not responsible for quality nor compatibility of the third-
party motion rigs.
3.7. SOFTWARE INSTALLATION
INFO
Note down the QS-220-PL serial number before installation as it’s needed to ac-
cess software download page.
The SERIAL NUMBER can be found on the M10 identification label in the XXXXXX-XXXXXX-
XXXXX-XXXXXX format. This serial number is also used for activation of FSMI (Force-
SeatMI) and MT (Motion Theater) licences - check information on page 29.
To download the software visit : QubicSystem.com/Download
Once the QS-220-PL is installed and connected correctly:
1. Connect power connection cord to the wall socket. If you own extended set con-
nect both power cords.
2. Download QubicManager.
3. Proceed with the installation steps and launch the application.
4. Turn on the system by switching on the power switch button on the QS-SB2 power
cabinet (on both if you own extended set).
5. Check position of Motion Lock Switch, unpress if needed.
6. The QS-220-PL will perform a start-up calibration.
User Manual R3.0 22