Qubic System QS-220-PL, User Manual

Page: 17 / 46

QS-220-PL
3. SETUP AND INSTALLATION
3.1. BEFORE QS-220-PL INSTALLATION
Qubic System DOES NOT approve exceeding or ignoring any of the points below and IS
NOT responsible for malfunctions, failures or injuries that are results of these actions :
WARNING
Dangerous voltage level may occur in the QS-SB2 power cab-
inet and connected cables during the operation and for a few
minutes after turning off the machine. Do not touch the de-
vice when the power switch is on.
WARNING
■
Cables must not be stretched and should be kept in a way that prevents
them from getting under the actuator or any part that can crush or tear
them.
■
DO NOT place down the actuators on the cable side on any surface, always
place them down with cable side up to avoid cable damages.
User Manual R3.0 13