Qubic System QS-220-PL, User Manual

Page: 18 / 46

QS-220-PL
WARNING
■
Each Actuator has to be used with the Stabilization Plate and should be
placed on a flat surface.
■
DO NOT use the actuators on very soft or fragile surfaces like rubber, glass,
or foam.
■
Be aware that QS-220-PL will crawl a little in every direction during oper-
ation. Those movements could damage the surface in the long term. The
manufacturer, its subsidiaries and their partners, are not responsible for
any floor damages.
■
DO NOT mount the rig in tight or cluttered spaces – remember that actuators
set motions to the rig and nothing should restrict its motion range.
■
Seat belts and other harnesses should be mounted as part of the motion
rig that move in the same way as the seat.
DO NOT attach them to any static
part or ground.
■
If you want to use the QS-220-PL in an unusual application, and you are not
sure, that the desired setup is feasible, contact the distributor/reseller.
User Manual R3.0 14