Qubic System QS-220-PL, User Manual

Page: 11 / 46

QS-220-PL
2.1. INTRO SET
WARNING
Check if the package contains all listed parts. If it is incomplete, please contact
the distributor/reseller.
For beginners, two actuators variant can be sufficient, Qubic System provides the option
to buy Intro Set that contains QS-MC6 and QS-220-PL (
QS-220-PL is delivered without
the pivot leg ).
The QS-MC6 includes following components :
■
Motion Lock Switch (x 1)
■
USB cable (x 1)
■
BUS communication cable (x 1)
■
M10 controller (x 1)
■
M-BUS terminator (x 1)
M10 controller is specifically designed to use communication protocol created by Qubic
System. It allows connecting PC with the QS-220-PL ,
DO NOT try to substitute this device.
M10 requires USB connection (for both cable and port in PC). M-BUS terminator, which
is an RJ45 connector with the resistor. It is a small but very important part used to mark
the last QS-SB2 power cabinet in the set.
User Manual R3.0 7