![background image](http://html2.mh-extra.com/html/qube-lighting/beam-7r/beam-7r_user-manual_3553007011.webp)
11
BEAM 7R 230W BEAM
UsER’s MAnUAl – KUllAnMA KlAvUzU
www.qube-lighting.com
9.How to make lamp reset
Press button as the first
picture--RESET
Press button as the frist picture--RESET
Options
Instructions
The operation mode
Channel model
X inversion
Y inversion
No DMX signal
The screen saver
17-20 channel is invalid
Guan/open
Guan/open
17-20 channel control speed (see channel table)
Do not use the encoder (light coupling) correct position
According to the original state continues to run
Close the backlit idle for 30 seconds
The motor return, stop running
Using encoder (light coupling) judging out-of-step and automat-
ically correct position
DMX address
XY
The encoder
1-512
16
Guan
keep
reset
open
20
op
DMX From the machine status: receiving DMX signal from the controller
or host
Voice
control
Receiving external sound or vibration, run the built-in application ef-
fect
Press “OK” button to enter edit state. At this point is selected to one
hundred, according to the “up” “down”
Key change address code. Press the “OK” button once again and
selected 10 editing. Press again
“OK” button to select bits editor. Then exit the editor state at a time.
Automatic Host: run automatically, and send the DMXD signal from machine
3.2. Set the interface
Summary of Contents for BEAM 7R
Page 1: ...230W BEAM English...