Rack-Mount RDMS
TM
Telemetry Receiver
42
Quasonix, Inc.
Figure 66: Load Menu, Load Presets
– Slot 1 Load Available, Slot 2 Empty
4.1.5.3
Save Rack Presets to USB
The Save Rack Presets to USB option allows the current rack presets (1 through 8) to be saved on a USB flash drive
(memory stick) as a single profile. To save rack presets to a USB flash drive, select the appropriate option, as shown
in Figure 67, then press the Enter key on the front panel.
Figure 67: Options Menu, Save Rack Presets to USB Selection
Insert a USB flash drive into the port on the front panel of the Rack-Mount RDMS™.
A dialog screen displays prompting the operator to enter a number between 0 and 999 using the rack’s front panel
numeric keypad, as shown in Figure 68. When the new value is entered, press the Enter key on the keypad.
Any number may be used to identify rack preset configurations saved onto a USB flash drive (memory stick). If
more than one configuration is saved, the number does not have to run sequentially, nor does it have to start at 0. For
example, one preset configuration might be saved as 44 and another might be saved as 397.
Another way of looking at this option is:
An operator has saved any number of presets in slots 1 through 8 using
the Save Rack Presets Menu described previously. Now the operator wants to save the complete set of presets for
this rack onto a USB memory stick. The operator can save up to 1000 profiles (or sets of presets) for this rack (or
any other racks) onto the same USB memory stick. Even if all 1000 profiles (1000 sets of 8 presets) were saved,
they would still only take up about 112 MB of space on the USB stick.