If problem occur with the data transfer, look in the section "Sysex Dump speed" in the chapter
System menu. There you can select three different speeds.
Send Temp - Sending the momentary settings
On menu page 8 the actual settings of all four parts and sequences can be sent to an external piece
of equipment. In connection with a software sequencer the dumping function works well, because
at the beginning of a song you can send the complete active settings to the POLYMORPH. Do the
following to send the momentary condition of the POLYMORPH over MIDI:
1.)
Push [WRITE] to get in the write menu.
2.)
By using [PAGE<>] select page 8. The display shows:
<8> Send Temp?
[ok]
3.)
Start the recording of the external sequencer, dump utilities etc.
4.)
Push [F1] to start the data transfer.
5.)
Leave the write menu with [EXIT].
Send sounds - Sending the user sound memory
In this menu you can archive the 128 single sounds of the POLYMORPH.
1.)
Push [WRITE] to get into the write menu.
2.)
By using [PAGE<>] select page 9. The display shows:
<9> Send sounds?
[ok]
3.)
Start the recording of the external sequencer, dump utilities etc.
4.)
Push [F1] to start the data transfer.
5.)
Leave the write menu with [EXIT].
Send sequences - Sending the sequencer memory
In addition to the setups the POLYMORPH has a memory for 50 sequences. They are sent as
follows:
1.)
Push [WRITE] to get into the write menu.
2.)
By using [PAGE<>] select page 10. The display shows:
<10> Send Seq.'s?
[ok]
3.)
Start the recording of the external sequencer, dump utilities etc.
4.)
Push [F1] to start the data transfer.
5.)
Leave the write menu with [EXIT].
53
The write menu
See page 47
