The combination of the synthesizer parts with the sequencer
setups
The POLYMORPH has a higher storage level for its adjustments, which permits snapshot memories.
It doesn't matter how many controls you have turned, or how many strange sounds are
selected or if sounds have been deleted or newly created, the momentary settings of all used
parameters can be saved by using a simple instruction.
This capability is available in the setup memory. The settings of all 4 synthesizers including their
effect settings and sequencer data are saved hear. Of course you can always fall back on the single
sounds, which are saved on the inside of a setup in the POLYMORPH. When you change a sound
inside of a setup, the original sound will not be touched. Rather the setup makes a copy of the
original sound and saves it as a part the complete setup.
The setups can be changed with the help from <SOUND>, when you are in the main page of the
POLYMORPH and the setup operation is selected. To find out if you can change a setup:
1.)
Leave the selected edit menu with [EXIT].
2.)
Look at the display to see if you are in setup operation (In the setup operation "Setupxx:"
appears in the top left side of the display). If not, push [F2] (below the display) to change
into the setup operation.
3.)
Now you can change the setups with <SOUND>.
The setups can be stored with the write menu. Further information see chapter "The write menu".
43
The combination of the synthesizer parts with the sequencer setups
See page 48
