Space distortion 1
Space distortion 2
Bright distortion 1
Bright distortion 2
EQ PanDelay
Super chorus
Super flanger
Multi delay
You have an extra possibility. You can call up a bypass function in order to hear the selected part
without effects. In the display behind the effect pre-adjustments appears:
FX-Bypass
Bypass-off
The bypass function does not change any effect settings. The settings simply are ignored. So, if you
take back the bypass function (Bypass-off), the effect settings become active again. Use this
function if you need a sound without any effects without losing your effect settings.
5.)
Confirm the selection with [F1].
6.)
Leave the write menu with [EXIT].
Initializing a sequence
With this function you can initialize a sequence from a selected part. After initializing, the Lines 1-
3 are no longer assigned to a parameter. The note line of this sequencer is filled with a middle C,
the cycle length are pre-adjusted to 8 and all rows of the sequencers are running forward.
These functions can help when creating a new sequence. And now, how to do the initialization of
a sequence:
1.)
Push [WRITE] to get in the write menu.
2.)
By using [PAGE<>] select page 7. The display shows:
<7> Init Seq?
[ok]
3.)
Confirm the initialization with [F1].
4.)
Leave the write menu with [EXIT]. The sequence is now initialized.
In general to the theme saving of data and System exclusive data
The following menu points are used for dispatching System exclusive data. This is known as
"dumping". System exclusive data is sent over the MIDI interface for data archiving. When the
memory of the POLYMORPH is full and you want to program further, you have the possibility to
save the sounds in a computer or MIDI data filer. Afterwards you can create new sound bank
without having to lose the finished ones. All of the following written dumping possibilities have one
procedure in common:
If you want to save into an external sequencer or a system exclusive (sysex) librarian, start the
recording first, wait for the pre-counter and then start the data transfer with the POLYMORPH.
52
The write menu
Tip
