Modulations wheel assignment: menu page 4-5
Menu pages 4 and 5 allow you to assign POLYMORPH controllers to the modulation wheel (MIDI
controller 1). On menu page 4 you can select the modulation destination and on menu page 5 you
can change the strength and polarity of the control. Go to the menu page 4 to select the
modulation destination:
Edit Part1 CONTR
<4> MW:Not assgn
This display means the modulation wheel it is not yet assigned to a parameter. However the
following parameters can be selected with <VALUE-TEMPO> wheel:
Panorama
Wave 1
Level 1
Detune 2
Level 2
Detune 3
Level 3
FilterDrv
HP cutoff
HP Reso
LP cutoff
LP Reso
Pitch EG
PWM EG
PWM Rate
PWM Depth
FM Rate
FM Depth
LFO3 Rate
LFO3 Depth
FX1 Level
FX1 Feedback
FX1 Rate
FX1 Depth
FX2 Level
FX2 Feedback
FX2 Rate
FX2 Depth
Distortion Gain
Distortion cutoff
Distortion Resonance
On menu page 5 you can select the modulation depth for the chosen parameter.
Edit Part1 CONTR
<5>MWDepth: +100
Here follow the selection possibilities:
+50
Full deflection of the modulation wheel makes a positive change of the parameter value.
The size of the change is 50% of the full value range.
+100
Full deflection of the modulation wheel makes a positive change of the parameter value.
The size of the change is 100% of the full value range.
-50
Full deflection of the modulation wheel makes a negative change of the parameter value.
The size of the change is 50% of the full value range.
-100
Full deflection of the modulation wheel makes a negative change of the parameter value.
The size of the change is 100% of the full value range.
Aftertouch assignment: menu pages 6-7
These pages assign controllers for the monophonic Aftertouch data. They are otherwise the same
as for the modulation wheel settings described above. Instead of modulation destination and the
strength of the modulation wheel, select the corresponding parameter of the aftertouch (keyboard
pressure).
Edit Part1 CONTR
<6> AT: Not assign
Edit Part1 CONTR
<7l ATDepth: +50
37
The Synthesizers of the POLYMORPH
