14
Adjustable Drop-in Armrests
The Pediatric Single Post Quick Height Adjustable Drop-in
Armrests can be adjusted and easily removed for easier
transfer onto and off of the power chair. The total height
adjustment range is 3 in. (7.62 cm) in 3/8-in. (0.95-cm)
increments. This range is measured from the top of the seat
pan to the top of the armrest pad. The total height adjustment
range is 7.75–10.75 in. (19.7–27.3 cm).
To remove the armrest assembly:
1. Rotate the armrest lever forward.
See figure 13.
2. Lift up the armrest assembly.
To install the armrest assembly:
1. Place the armrest assembly into the armrest block.
See
figure 13.
2. Rotate the armrest lever rearward.
Top height adjustments do not require any tools. The top
height adjustment range is 1 in. (2.54 cm) in 3/8-in. (0.95-
cm) increments. The bottom height adjustment range is 2 in.
(5.08 cm) in 1-in. (2.54-cm) increments.
To adjust the top height:
1. If present, remove the optional locking pin.
See figure 13.
2. Pull the armrest up to raise, or press the release lever to
lower the armrest to the desired height.
3. If applicable, reinsert the locking pin.
4. Repeat for the other armrest if necessary.
To adjust the bottom height:
1. Remove screws 1 and 2 from the detent bar.
See figure 14.
2. Slide the armrest up or down to the desired height.
3. Line up the holes in the armrest.
4. Reinstall screws 1 and 2 into the detent bar.
5. Repeat for the other armrest if necessary.
Figure 13. Pediatric Single Post Quick Height Adjustment
Armrest Removal/Installation
Locking
Pin
Armrest
Lever
Armrest
Block
Figure 14. Pediatric Single Post Quick Height Adjustment
Drop-in Adjustment
Armrest Lever
Armrest Block
Screws 1 and 2
Detent bar
BASIC OPERATION INSTRUCTIONS
Summary of Contents for TRU-BALANCE 3
Page 24: ...24 BASIC OPERATION INSTRUCTIONS...
Page 25: ...25 BASIC OPERATION INSTRUCTIONS...
