7
iLevel® Feature (Optional)
Your power chair may be equipped with the iLevel feature
that will be used in conjunction with your TRU-Balance 3
Power Positioning System. The iLevel feature is mounted
on a Quantum power base for maximum stability when the
seating is elevated.
See figure 4.
NOTE: If your power chair is equipped with a TRU-
Balance 3 Power Positioning System, refer to the
information provided in the operation manual included
in your owner's package.
Before operating the iLevel feature, read the following.
These guidelines are provided for your benefit and will
aid you in the safe operation of the iLevel feature.
Turn off the power before you are seated in your
power chair.
Always have assistance when you are being seated
in or transferring to your power chair.
Follow all of your procedures and heed the warnings
as explained in this owner’s manual, supplemental
manuals, and the Consumer Safety Guide.
The center of gravity of your power chair was factory set
to a position that meets the needs of the demographic
majority of users. Your Quantum Rehab Provider has
evaluated your power chair and made any necessary
adjustments to suit your specific requirements. Do not
change your seating configuration without first contacting
Pride/Quantum or your Quantum Rehab Provider.
Some power chair components are heavy. You may
need assistance to lift or carry them. Please refer to
the specifications table for specific component weights
before you disassemble the power chair.
Remove the occupant from the power chair before
making any adjustments.
NOTE: The iLevel feature is automatically engaged when
the power elevating seat is activated and the iLevel
indicator is displayed on your controller.
The iLevel feature is accessed through the controller or single
switch, and the power chair must be on a flat, level surface to
activate iLevel. Once the seating system actuator is started, the
iLevel boots (
see figure 4) inhibit movement of the front caster
wheels and restrict the power chair to 1 in.–1.5 in. (2.54 cm–
3.81 cm) of climbing ability. The seating system can be reclined
or tilted up to 20° while the iLevel feature is activated.
NOTE: For more information on the iLevel warning
displays, refer to the basic operation instructions for
your controller.
BASIC OPERATION INSTRUCTIONS
MANDATORY!
WARNING!
Single Switch
iLevel® Boot
(1 of 2 Shown)
Figure 4. TRU-Balance 3 with iLevel Feature and Controller
Indicators
Q-Logic 3 Controller
1a–No Restrictions
1c–Reduce Speed Restrictions
1b–Safe Elevation
1d–Full Drive Lockout
NE+ Controller
iLevel® Engaged
iLevel® Not Engaged
1
1a
1b
1c
1d
Q-Logic 3 Controller Indicators
Summary of Contents for TRU-BALANCE 3
Page 24: ...24 BASIC OPERATION INSTRUCTIONS...
Page 25: ...25 BASIC OPERATION INSTRUCTIONS...
