1.
Controller A
2.
SAS port 1
3.
SAS port 2
4.
Controller B
The following figure shows the drive ports (SAS expansion ports) on a dual-controller configuration
for the E2860 controller shelf. The drive ports are at the far right of each controller.
1.
Controller A
2.
Controller B
3.
SAS port 1
4.
SAS port 2
Drive shelves
The following figures show the SAS ports on a DE212C drive shelf or a DE224C drive shelf. The I/O
modules (IOMs) occupy the top half of the shelf. Each IOM has four SAS-3 expansion ports. You
can connect these ports to SAS-3 expansion ports on another drive shelf or drive tray or to SAS
expansion ports on a controller shelf or controller-drive tray.
1.
IOM A
2.
SAS port 1
3.
SAS port 2
4.
SAS port 3
5.
SAS port 4
The following figure shows the SAS ports on a DE460C drive shelf. The I/O modules (IOMs) occupy
the middle positions in the shelf Each IOM has four SAS-3 expansion ports. You can connect these
ports to SAS-3 expansion ports on another drive shelf or to SAS expansion ports on a controller
shelf.
84 |
Summary of Contents for StorNext QD7000
