![background image](http://html2.mh-extra.com/html/quantum/stornext-qd7000/stornext-qd7000_hardware-manual_3493349069.webp)
Attention:
Possible loss of data access – You must install alternate path software or an alternate
path (failover) driver on the host to support failover in the event of an HBA failure or a host
channel failure. Simplex controller configurations do not support failover.
One host to a storage array
The following figure shows an example of a switch topology with one host, a controller shelf, and a
zoned switch. Each outlined group of ports on the switch represents a zone.
74102
Host/Server
HBA 1
Host
Port 1
Controller A
Controller B
Host
Port 2
Host
Port 2
HBA 2
Host
Port 1
The following table lists the redundant and non-redundant components in a switched configuration
with one host and a controller shelf.
Component
Redundant
Host/server
Non-redundant
Host adapter
Redundant
Host-to-controller cable
Redundant
Switch
Use two switches for full redundancy. A single
zoned switch is not redundant.
Controller
Redundant
Two hosts to a storage array
The following figure shows an example of a switch topology with two hosts, a controller shelf, and a
zoned switch. Each outlined group of ports on the switch represents a zone.
Note:
The hosts/servers in this example must be clustered to be redundant.
60 |
Summary of Contents for StorNext QD7000
