5.
Host adapters
6.
Controller A
7.
Controller B
8.
Controller-drive tray for the storage array
When you use
out-of-band management, the storage management station is connected through an
Ethernet network to each of the controllers in the controller shelf or controller-drive tray. E2800 and
E5700 controller shelves can use out-of-band management with SANtricity System Manager. E2800
and E5700 controller shelves might also use the SANtricity Storage Manager Enterprise
Management Window (EMW) with either management method. Out-of-band management is an
optional alternative to in-band management for all other models of controller-drive trays.
78034-00
8
1
2
2
2
3
4
5
5
7
9
9
6
1.
Ethernet network
2.
User workstations sending and receiving data
3.
Storage management station
4.
Host
5.
Host adapters
6.
Controller A
7.
Controller B
8.
Controller shelf (controller-drive tray)
9.
Ethernet cable from the controllers to the ethernet network
With out-of-band management, a Dynamic Host Configuration Protocol (DHCP) server is
recommended for assigning IP addresses and other network configuration settings. A DHCP server
provides the network administrators the ability to manage and automatically assign IP addresses. If a
DHCP server is not used, you must manually configure the controllers. For more information, see
SANtricity Power Guide for Advanced Users for your operating system or the "Adding a Host or
Storage Array" online help topic in the Enterprise Management Window.
Cabling concepts and best practices | 15
Summary of Contents for StorNext QD7000
