![background image](http://html2.mh-extra.com/html/quantum/stornext-qd7000/stornext-qd7000_hardware-manual_3493349079.webp)
5.
SAS port 4
Drive trays
The following figures shows the SAS ports on a DE6600 or a DE5600 drive tray. Each environmental
services module (ESM) has two SAS-2 in ports and one SAS-2 expansion (out) port. You can
connect the SAS in ports to the SAS expansion port on another drive tray or to the SAS expansion
port on a controller-drive tray.
DE6600 Drive Tray
DE5600 Drive Tray
1.
ESM A
2.
SAS in-port 1
3.
SAS in-port 2
4.
SAS out (expansion) port 3
5.
ESM B
Drive cabling topologies for the E5724 controller shelf and EF570 flash
array
Depending on the number and type of drive shelves that you need to connect, see the applicable
figure for a cabling topology. Each example shows a duplex controller shelf configuration with
redundant paths to the drive shelves. Several options for cabling might be possible for a given drive
shelf configuration.
70 |
Summary of Contents for StorNext QD7000
