Quantum PX720 Unpacking and Installation Instructions
Document 6444602-04 A01
March 2005
Unpacking the Library
7
• Avoid contact with power supplies, EMI filters, and AC electrical
components while the library is connected to a power outlet.
• Use an antistatic wrist strap.
• Keep static-sensitive parts in their original shipping containers until
ready for installation.
• Do not place static-sensitive parts on a metal surface. Place them inside
their protective shipping bag or on an antistatic mat.
• Avoid touching connectors and other components.
Unpacking the Library
0
This section explains how to unpack the library and move it to its final
installation location. The PX720 is shipped in packing materials designed to
protect it from damage during transit. By following these instructions, you
help ensure that the library will continue to be safeguarded after it arrives at
the installation site.
The following are the major steps in this procedure:
•
Receiving the Library
•
Unboxing the Library
•
Positioning the Library
•
Unpacking the Library
•
Leveling the Library
Receiving the Library
0
Unpack the library as close to the installation site as possible. Inspect the
shipping pallet and carton for damage that may have occurred during
shipment. Report any damage to the shipper.
Note:
Dry climates and cold-weather heating environments have lower
relative humidity and are more likely to produce static electricity.
Warning:
The Quantum PX720 with 20 tape drives weighs 1350 pounds
(612 kg). Two people are required to move and install the
library.
