![background image](http://html2.mh-extra.com/html/quantum/px720/px720_unpacking-and-installation-instructions_3866220022.webp)
Quantum PX720 Unpacking and Installation Instructions
Document 6444602-04 A01
March 2005
22
Unpacking the Library
Figure 23 Panel Shipping
Restraints Storage
Locations
Storing the Shipping
Materials
0
To store the shipping and packaging materials for future use:
1
Detach the ramp and place on top of the pallet.
2
Fold the shipping bag.
3
Place the shipping bag, foam cap, screws, internal library frame restraint,
and other packaging materials on the pallet.
4
Collapse the cardboard box.
5
Place the cardboard box on top of the packaging materials on the pallet.
6
Secure the pallet, packaging materials, and cardboard box for future use.
Leveling the Library
0
To level the library:
1
Rotate each foot of the library until it makes contact with the floor.
2
Rotate each foot an additional 1/4 turn with the open-end wrench to
begin raising the library.
3
Center a carpenter’s level on the top front edge of the library.
4
Check the gauge on the level. If the front of the library is level, proceed to
step 6
. If it is not level:
a
Determine which side of the library is low.
b
Adjust the leveling foot on the low side of the library by rotating the
leveling foot with the open-end wrench.
Left storage position shown
Panel restraint
storage locations