PX502 Tape Library Quick Start Guide
2
Choosing a Location
0
When choosing an installation site for the PX502, consider
the following requirements:
•
Rack Space Requirements
•
Environmental Conditions
Rack Space Requirements
0
Table 1
contains the rack requirements for the PX502 tape
library.
Table 1 Rack Requirements
Environmental Conditions
0
The installation site must have the following environmental
conditions:
•
Humidity: 20%-80% non-condensing
•
Temperature: 10°C-35°C (50°F-95°F)
•
Altitude: -500 to 10,000 feet (-152 to 3048 meters)
These environmental conditions apply when the PX502 tape
library is in operation.
Preparing for the Installation
0
Before you begin the installation procedure in this section,
make the following preparations as described in this
section:
•
Providing Necessary Tools
•
Taking ESD Precautions
Dimensions
PX502
Depth
31 in (78.7 cm)
Width
19 in (48.3 cm)
Height
6.75 in (17 cm), 4U
Weight
52 lbs (23.6 kg)
Air Clearance
Open 4 in (10 cm) behind unit
for proper air flow
N
OTE
:
For additional specifications, refer to the
Quantum PX500 Series User’s Guide
(PN 81-
81290)
Providing Necessary Tools
0
Provide the following tools for unpacking and installing the
PX502 tape library:
•
#1 PHILLIPS® screwdriver
•
#2 PHILLIPS screwdriver
•
#1 flat blade screwdriver
•
Allen wrench (2.5mm and 3mm) included in accessory
kit
•
Antistatic wrist strap included in accessory kit
Taking ESD Precautions
0
Some components within the PX502 tape library contain
static-sensitive parts. To avoid damaging these parts while
performing installation procedures, always observe the
following precautions:
•
Keep the PX502 turned off during all installation
procedures.
•
Use an antistatic wrist strap (included in the accessory
kit).
•
Keep static-sensitive parts in their original shipping
containers until ready for installation. Look for the ESD
sticker to identify static sensitive parts.
•
Avoid touching connectors and other components.
Unpacking the PX502 Tape Library
0
This section explains how to unpack the PX502 tape library
and move it to its final installation location.
N
OTE
:
Dry climates and cold-weather heating
environments have lower relative humidity and
are more likely to produce static electricity.
N
OTE
:
Inspect the outer library packaging for damage. If
there is any damage evident on the library
packaging, do not continue with the installation
and contact Quantum customer support.
