![background image](http://html1.mh-extra.com/html/quantum/lattus-a10/lattus-a10_user-manual_3560398045.webp)
Chapter 9: Troubleshooting
Monitoring LEDs on the Lattus A10 Access Node Hardware
Lattus A10 Access Node User’s Guide
39
Monitoring LEDs on the
Rear of the Lattus A10
Access Node
•
Power Indicators (handles)
: Each power supply has an illuminated
translucent handle that serves as an indicator to show whether
power is present or whether a power fault has occurred. Each of the
power indicator's states are listed below with an explanation of
what each one indicates:
•
Not lit
= Power is not connected
•
Green
= A valid power source is connected to the power supply
and the power supply is operational
•
Flashing amber
= Indicates a problem with the power supply
•
Flashing green
= When hot-adding a power supply, this
indicates that the power supply is mismatched with the other
power supply (in terms of efficiency, feature set, health status,
and supported voltage). Replace the power supply that has the
flashing indicator with a power supply that matches the
capacity of the other installed power supply.
Summary of Contents for Lattus A10
Page 1: ...User s Guide Lattus A10 Access Node 6 68018 03 Rev A...
Page 6: ...Contents vi Lattus A10 Access Node User s Guide...
Page 12: ...Chapter 3 Product Overview 6 Lattus A10 Access Node User s Guide...
Page 16: ...Chapter 5 Lattus A10 Access Node Licensing 10 Lattus A10 Access Node User s Guide...