![background image](http://html1.mh-extra.com/html/quantum/lattus-a10/lattus-a10_user-manual_3560398028.webp)
Chapter 6: Basic Operations
Configuring Lattus Object Storage Policies
22
Lattus A10 Access Node User’s Guide
this parameter. Values representing sizes can be postfixed by k, m or
g to represent multipliers of 1024, 1024*1024 and
1024*1024*1024.
•
Filenames Excluded from Storing
: Specify any filenames you want
excluded from the storage process.
•
Relative Priority
: If desired, indicate relative storage priority.
Preference is given to files from policies with a lower priority
number when the Lattus A10 Access Node considers storage
candidates.
Truncation
The Advanced tab’s
Truncation
section contains the following
parameters:
•
Minimum File Idle Time before Truncation
: Specify the interval of
time for a file to remain idle before truncation begins.
•
Minimum File Size to Truncate
: Specify the minimum size a file
must be in order to be eligible for truncation.
•
Filenames Excluded from Truncation
: Specify any filenames you
want excluded from the truncation process.
•
Stub File Size
: The stub file is the readable portion of the file that
remains after truncation. Enter the desired target size to allocate for
the truncated file stub.
Finishing the Policy
1
When you are finished entering information about the new policy,
click
Apply
, or click
Cancel
to exit without saving.
2
After the
Status
screen informs you that the policy was created
successfully, click
OK
.
Summary of Contents for Lattus A10
Page 1: ...User s Guide Lattus A10 Access Node 6 68018 03 Rev A...
Page 6: ...Contents vi Lattus A10 Access Node User s Guide...
Page 12: ...Chapter 3 Product Overview 6 Lattus A10 Access Node User s Guide...
Page 16: ...Chapter 5 Lattus A10 Access Node Licensing 10 Lattus A10 Access Node User s Guide...