![background image](http://html1.mh-extra.com/html/quantum/lattus-a10/lattus-a10_user-manual_3560398018.webp)
Chapter 6: Basic Operations
Logging in to the Lattus A10 Access Node CLI
12
Lattus A10 Access Node User’s Guide
Logging in to the Lattus A10 Access Node CLI
Some tasks require you to use the Lattus A10 Access Node command
line interface (CLI). To log in to the Lattus A10 Access Node's CLI, do the
following:
1
Connect to the Lattus A10 Access Node through SSH by using the
following command:
ssh root@[Lattus A10 IP]
2
At the password prompt, enter the root password
Note:
The root password should have been set during system
installation.
Logging in to the Lattus A10 Access Node GUI
Some tasks require you to use the Lattus A10 Access Node GUI. To log in
to the Lattus A10 Access Node's GUI, do the following:
1
Open a Web browser (such as Internet Explorer or Firefox,) and in
the address field enter
https://
IP address
(where
IP address
is the IP
address of the Lattus A10 Access Node whose GUI you want to
access).
2
When the login screen appears, enter your user name and
password.
Note:
The default user name is
admin
, and the default password
is
password
. If you changed the user name and password
to something other than the defaults, write them in the
spaces below for reference:
User name: ______________________________
Password: _______________________________
Summary of Contents for Lattus A10
Page 1: ...User s Guide Lattus A10 Access Node 6 68018 03 Rev A...
Page 6: ...Contents vi Lattus A10 Access Node User s Guide...
Page 12: ...Chapter 3 Product Overview 6 Lattus A10 Access Node User s Guide...
Page 16: ...Chapter 5 Lattus A10 Access Node Licensing 10 Lattus A10 Access Node User s Guide...