Step 4: Install and Configure Lattus A10 Software and NAS Services
Configuring Lattus Object Storage
40
Lattus A10 Access Node Installation Guide
•
*Bucket Name
: Enter a name for the S3 bucket. Use "s3-data1" for
Lattus A10 user data.
4
Click
Add
. The S3 buckets table displays the newly added S3 bucket
for Lattus A10 user data.
5
Repeat step 3, using "s3-backup" as the bucket name for Lattus A10
backup data.
Configuring Lattus Object Storage
Complete the following steps:
1
Collect Lattus configuration information for StorNext:
• Namespaces: NS_BACKUP and NS_DATA1 were previously
• The Lattus Manager host IP address and Port number used for
Web GUI access.
• The IP addresses and the port number range of the Lattus
controller nodes.
• The Lattus REST interface: Lattus AXR or Lattus S3.
2
Launch the GUI:
a
Open a Web browser on the Lattus A10 node, and in the
address field enter
https://
IP address
(where
IP address
is the
Lattus A10 Access Node’s IP address).
b
When the login screen appears, enter
admin
and
password
as
the user name and password.
c
Click
Login
.
3
From the
Configuration > Welcome
page, verify the available disks
and then click
Next
.