Solar Panel Connector Port
Due to the large amount of
amperage the solar charge
controller is able to handle, this
model uses a heavy-duty 2 pin
intermediary connector to handle
multiple solar panels. To connect,
lift the cover, and oriented as
shown with the boss on top, slide
the connector into the socket.
Please note that the cover has a
latch-pawl to prevent the jack from
creeping out. To remove, lift the
cover slightly to disengage the
latch, and remove the jack.
(Although both connectors are
shown connected in the upper
photo for illustration purposes, it
is not recommended that both the
AC charger and the solar charger
operate at the same time.)
12
