Chapter 2 Installation
Installing the GoVault Data Protection Software
GoVault™ Data Protection Software, Version 1.0 User’s Guide
8
Installing the GoVault Data Protection Software
Install the GoVault data protection software on your workstation or
server system as follows:
1
Verify that your system meets the hardware and software
requirements listed in the
System Requirements
subsection.This
means that you have already:
a
Installed the GoVault dock and cartridge disk drive.
b
Installed the appropriate version of the GoVault system
application software.
c
Restarted your system and confirmed that your GoVault dock
and cartridge disk drive and system application software are
fully functional.
You cannot install the GoVault data protection software until you
have installed the GoVault dock and cartridge disk drive
and
the
GoVault system application software. If you have not done this,
follow the installation instructions in either the
GoVault for Windows
User’s Guide
or the
GoVault for Windows Quick Start Guide
before
installing the GoVault data protection software.
Software
• One of the following operating systems:
• Windows XP (32- or 64-bit), SP2
• Windows Server 2003 (32- or 64-bit), SP1 or R2
• Windows Vista (all editions, 32- or 64-bit)
• Microsoft .Net Framework
*
• GoVault for Windows system application software
*
The .NET Framework software is provided on the GoVault Product
Documentation and Resource CD, and will be installed automatically
if it is not already installed on your system.
