Chapter 2 Installation Procedures
Installing the Internal GoVault Dock
GoVault™ for Windows User’s Guide
12
6
Connect one end of the SATA data cable to the SATA data connector
on the back of the internal GoVault dock (see
figure 5
).
Figure 5 Connecting the SATA
Data Cable to the Dock
7
Carefully route the SATA data cable from the internal GoVault dock
and connect the other end to either the SATA-equipped motherboard
or the SATA card (see
figure 6
).
Figure 6 Connecting the SATA
Data Cable to the SATA Card
8
Connect the drive end of the SATA power supply conversion adapter
cable to the SATA power connector on the back of the internal
GoVault dock (see
figure 7
).
Caution:
Do not force SATA connections. SATA connectors are
designed to fit one way only. If you encounter any
difficulty in making the SATA cable connection, rotate
the cable and try again.
SATA data connector
SATA data cable
SATA card data connector
SATA data cable
