Performing Initial Configuration
Quantum DXi6900 Installation Guide
66
l
IP Address
- The IP address of the DXi6900.
l
Netmask
- The network mask of the DXi6900.
l
Gateway
- The gateway of the DXi6900. (This is usually not the same as the default gateway.)
c. Select the
Any
check box to allow all traffic types (management, replication, and data) on the
interface.
d. Click
Update
to save the changes you made to the
IP Address
table.
12. Do not make any changes under
IP Address Configuration > Routing Details
unless directed by
your network administrator.
Note:
If the DXi needs to communicate with another subnet that is not reachable using the default
gateway, a route must be added under the Routing Details section. (For more information about
interface routing, see the “Network” section in the
Quantum DXi6900 User’s Guide
, 6-68159).
13. Click
Next
to continue.
The
Date & Time
).
Figure 55:
Getting Started Wizard: Date & Time
14. If necessary, select
Manual Date & Time Settings
to manually set the system date and time.
Specify the
New System Date
by clicking
Calendar
. Specify the
New System Time
using the drop-
down boxes.
Note:
You can also choose to synchronize the system time with an NTP time server. To select a
timeserver pool, you must have specified at least one DNS IP address in step 5d above.
Otherwise, you must specify the IP address of the timeserver pool. For more information, see the
Quantum DXi6900 User’s Guide
, 6-68159).