Initializing the Storage Arrays and Software
Quantum DXi6900 Installation Guide
57
Set controller in duplex mode.
Setting the Storage Array user label to Qarray1.
Set controller default networking.
Done with Qarray1
Starting RAID setup script for Qarray1...
Enabling IAF support.
Disable AVT in controller A
Disable AVT in controller B
Disable Parity Repair, enable fail on PFA
Created Disk_Pool_99
Reserved space for 1 hotspares in Disk_Pool_99
create TRAY_99_VOL_1 of size 15.756 TiB
Creating TRAY_99_VOL_1
Setting additional attributes for Volume TRAY_99_VOL_1.
create TRAY_99_VOL_2 of size 15.756 TiB
Creating TRAY_99_VOL_2
Setting additional attributes for Volume TRAY_99_VOL_2.
Created Disk_Pool_0
Reserved space for 1 hotspares in Disk_Pool_0
create TRAY_0_VOL_1 of size 15.756 TiB
Creating TRAY_0_VOL_1
Setting additional attributes for Volume TRAY_0_VOL_1.
create TRAY_0_VOL_2 of size 15.756 TiB
Creating TRAY_0_VOL_2
Setting additional attributes for Volume TRAY_0_VOL_2.
Setting the Storage Array cache block size to 32.
Setting the Storage Array media scan rate to enabled for every 30 days.
Enable ALUA.
Enable T10/PI host ports.