Quantum DXi6900 Installation Manual Download Page 10

Page: 10 / 82

Unpacking the DXi6900

Quantum DXi6900 Installation Guide

Unpacking the DXi6900

By following these unpacking instructions, you help ensure that the system will continue to be safeguarded
after it arrives at the installation site:

Unpacking the DXi6900 Node on the next page

Unpacking the Additional Node Components on page 12

Unpacking the DXi6900Array Module or Expansion Module on page 13

Caution:

Make sure to retain all packing materials, as well as the documentation and other items

included in the shipping box. The packaging materials must be used if the system is relocated.

WARNING:

The DXi6900 G1 Node (including hard drives) weighs 53.0 pounds (24.0 kg). The

DXi6900 G2 Node (including hard drives) weights 49.3 pounds (22.4 kg). A minimum of two people are
required to lift the chassis.

Unpacking the DXi6900 Node

The box containing the DXi6900 Node contains the following items:

Item

Descriiption

Rack mount rails

Includes cable management straps.

Accessory kit

Includes the following:

DXi6900 User Essentials

Product Installation Instructions card

Quantum Products Regulatory Documentation CD

Registration (Warranty) card

Base Node kit

Includes the following:

C13 to C14 power cord (2)

North American power cord (2)

Cable, CAT6, RJ45, non-plenum, blue solid, 25 feet (3)

Cable kit Fibre Channel HBA

Includes the following:

(DXi6900 G1) Cable, 10 GB, 6 meter (6)

(DXi6900 G2) Cable, 12 GB, 6 meter (4)

Node bezel and bezel keys

A network cable kits ships with the Node in a separate box, depending on configuration (see

Unpacking the

Additional Node Components on page 12

Summary of Contents for DXi6900



















































































Search results

Summary of Contents for DXi6900

Reviews:

Related manuals for DXi6900

Brands by name

Popular brands

Quantum DXi6900, Installation Manual

Search results

Summary of Contents for DXi6900

Reviews:

Related manuals for DXi6900

Brands by name

Popular brands