![background image](http://html1.mh-extra.com/html/quantum/dxi-v-series/dxi-v-series_manual_3715194086.webp)
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
76
Other System Configuration CLI Commands
Editing a Replication
Source to a Target LSU
for AIR
syscli --edit ostair --sourcess <source_server_name> [--sourcelsu
<source_lsu_name>] [--disabled | --enabled] [--targetss
<target_server_name>] [--target <host_name_or_ip>] [--targetlsu
<target_lsu_name>] [--airuser <air_username>]
This CLI allows the admin user to modify the relationship that directs a Storage
Server/LSU to replicate to a target Storage Server/LSU for Automatic Image
Replication (AIR). To accomplish the edit function,
--edit
requires only
--sourcess <source_server_name>
as input. All other values are optional.
If an LSU name is not specified
_PhysicalLSU
will be used as a default.
Note:
If you have used
--edit
to disable OST AIR and decide to enable it, no
AIR information is required to complete the
--enable.
No input options
are required because OST AIR is not removed by
--disable
.
CLI command options:
•
--edit
: Directs an LSU to a target AIR storage server.
•
--sourcess
: Specify the Storage Server that is to be replicated. Use the
command
--list storageserver
to get a listing of storage server names.
•
--sourcelsu
: Specify the LSU on the storage server specified with
--sourcess
.
If not specified,
_PhysicalLSU
will be used. Use command
--list lsu --storageserver <server_name>
to get a listing of LSU names.
•
--disabled
: If specified, will disable AIR on
--sourcelsu.
•
--enabled
: Enable AIR if it has been disabled.
•
--targetss
: Specify the Storage Server on the target system to receive the
replicated image.
•
--target
: Specify the replication target host id. If the system or the share/
partition has two targets configured, you must use the
--target
option and
you must specify a target IP or hostname. If the system or the share/
partition has no target configured, invoking the commands will result in
error.
•
--targetlsu
: Specify the LSU on the storage server specified with
--targetss
.
If not specified,
_PhysicalLSU
will be used.
•
--airuser
: Specify the username defined on the AIR server. This user must
already be created with --add airuser. Use the command --list airuser to get
a listing of defined users.
Other System Configuration CLI Commands
The following sections list other system configuration CLI commands:
•
•
Outgoing E-mail Server CLI Commands
•