Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
44
Replication CLI Commands
•
--name
: Must be a valid NAS share name for the system. To see a list of
available NAS shares on the system, use
syscli --list share
.
•
--target
: The host name or IP address of the replication target.
Deleting a NAS Target
syscli --del nastarget --name <NAS share name> --target
<host_name_or_ip>
This CLI command allows the admin user to remove a replication target from the
NAS share.
CLI command options:
•
--del
: Remove a replication target from the NAS share.
•
--name
: Must be a valid NAS share name for the system. To see a list of
available NAS shares on the system, use
syscli --list share
.
•
--target
: The host name or IP address of the replication target to be
removed.
Listing NAS Targets
syscli --list nastarget --name <NAS share name>
This CLI command allows the admin user to list the replication targets of the
NAS share.
CLI command options:
•
--list
: Displays the list of replication targets of the NAS share.
•
--name
: Must be a valid NAS share name for the system. To see a list of
available NAS shares on the system, use
syscli --list share
.
Adding a VTL Target
syscli --add vtltarget --name <vtl_name> --target <host_name_or_ip>
This CLI command allows the admin user to add a replication target to the
partition.
CLI command options:
•
--add
: Add a replication target to the partition.
•
--name
: Must be a valid partition name for the system. To see a list of
available partitions on the system, use
syscli --list vtl
.
•
--target
: The host name or IP address of the replication target.
Deleting a VTL Target
syscli --del vtltarget --name <vtl_name> --target <host_name_or_ip>
This CLI command allows the admin user to remove a replication target from the
partition
CLI command options:
•
--del
: Remove a replication target from the partition.
