Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
OST CLI Commands
75
Adding a Replication
Source to a Target LSU
for AIR
syscli --add ostair --sourcess <source_server_name> [--sourcelsu
<source_lsu_name>] --targetss <target_server_name> [--target
<host_name_or_ip>] [--targetlsu <target_lsu_name>] --airuser
<air_username>
This CLI allows the admin user to set up the initial relationship that directs a
Storage Server/LSU to replicate to a target Storage Server/LSU for Automatic
Image Replication (AIR). To accomplish the add function,
--add
requires the
following as input:
--sourcess <source_storage_server>
,
--targetss
<target_server_name>
, and
--airuser <air_username>
. All other values are
optional.
If an LSU name is not specified
_PhysicalLSU
will be used as a default.
CLI command options:
•
--add
: Directs an LSU to a target AIR storage server.
•
--sourcess
: Specify the Storage Server that is to be replicated. Use the
command
--list storageserver
to get a listing of storage server names.
•
--sourcelsu
: Specify the LSU on the storage server specified with
--sourcess
.
If not specified,
_PhysicalLSU
will be used. Use the command
--list lsu --storageserver <server_name>
to get a listing of LSU names.
•
--targetss
: Specify the Storage Server on the target system to receive the
replicated image.
•
--target
: Specify the replication target host id. If the system or the share/
partition has two targets configured, you must use the
--target
option and
you must specify a target IP or hostname. If the system or the share/
partition has no target configured, invoking the commands will result in
error.
•
--targetlsu
: Specify the LSU on the storage server specified with
--targetss
.
If not specified,
_PhysicalLSU
will be used.
•
--airuser
: Specify the username defined on the AIR server. This user must
already be created with
--add airuser
. Use the command
--list airuser
to get
a listing of defined users.
Removing the Target
AIR
syscli --del ostair --sourcess <source_server_name> [--sourcelsu
<source_lsu_name>]
This CLI allows the admin user to remove the target Automatic Image
Replication (AIR) specified on a particular LSU.
If an LSU name is not specified
_PhysicalLSU
will be used as a default.
CLI command options:
•
--del
: Removes a target AIR storage server previously specified on an LSU.
•
--sourcess
: Specify the Storage Server that contains the LSU. Use the
command
--list storageserver
to get a listing of storage server names.
•
--sourcelsu:
Specify the LSU on the storage server specified with
--sourcess
.
If not specified,
_PhysicalLSU
will be used. Use the command
--list lsu --storageserver <server_name>
to get a listing of LSU names.
