Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
Scheduler CLI Commands (DEPRECATED)
59
Scheduler CLI Commands (DEPRECATED)
Note:
Configuring scheduled events using the CLI interface will be
discontinued in a future release. Please use the
Configuration >
Scheduler
page in the GUI instead.
This Scheduler CLI Commands allow the admin users to establish and maintain a
schedule for particular event types. The events can be a single occurrence or can
be set to recur on a schedule.
The following sections describe the supported scheduler CLI commands:
•
•
•
•
Adding an Event
DEPRECATED: This CLI allows the admin users to establish a schedule for
particular event types. The events can be a single occurrence or can be set to
recur on a schedule.
Note:
When using the
--add
command only a single event or an event series
can be added.
syscli --add event [--desc <event name>] {--throttle <bandwidth><K|M>
[--service REP]} | --reclamation | --healthcheck | {--emailreports --type
config|status} | {--replication vtl|nas --name <name> [--target
<host_name_or_ip>]} --start <datetime> [--end <datetime>] [--daily | --
weekly sun,mon,tue,wed,thu,fri,sat | --monthly | --monthday last |
{1|2|3|4}{sun|mon|tue|wed|thu|fri|sat} | --yearly | --yearday
{1|2|3|4}{sun|mon|tue|wed|thu|fri|sat} [--interval <interval>] [--until
<date> | --count <count>]]
CLI command options:
•
--add:
Specifies when, how long, and how often a scheduled event will
occur.
•
--desc
: Description for the event. Spaces are allowed, but quotes for the
<event name> are required for this.
•
--throttle
: Indicates this is a scheduled throttle event and to set the
threshold at <bandwidth>. For example, if 100 KB/s is desired, enter
--throttle 100K.
If 100 MB/s is desired, enter
--throttle 100M
.
•
--service
: Specify which service to throttle.
•
--reclamation
: Indicates this is a scheduled reclamation event.
Note:
Reclamation requires a daily or weekly recurrence not to exceed
every 7 days or once a week.
